Candy CRU164, User'S Operation Manual

14 

If after the above checked there is still a fault calling your local service center. 

In-guarantee customer should ensure that the above checks have been made as the 

engineer will make a charge if the fault is not a mechanical or electrical breakdown. 

Symptom 

What to do 

Check that the power supply is not disconnected 

Check the thermostat is not set to “0 ”; 

Check that the plug is inserted correctly into the mains 

socket; 

Check that automatic cut-out on the mains line has not 

tripped or that a fuse has blown; 

Appliance operation failure

Check that the power cable is not faulty. 

Check that the door close properly; 

Check that air can circulate freely;   

Check the thermostat setting is correct; 

Check the refrigerator is not positioned close to the heat 

sources; 

Internal temperature is not 

sufficiently cool

Check the condenser is clean; 

Internal temperature is too 

low 

Check that the thermostat setting is correct. 

Adjust the thermostat to give correct temperature control. 

Check that the door is closed. 

Large quantities of food have recently been placed in the 

cabinet / and or door is frequently opened. 

The compressor runs 

continuously

Check that air ventilation is not obstructed. 

Internal lamp does not 

work

Check that the appliance is switched on. Otherwise 

disconnect the plug from the mains socket, remove the 

projection grille from the thermostat unit and check that the 

light is tightened correctly. Replace any defective light 

bulbs with a new 

15W 

bulb that has the same voltage as 

that indicated on the data plate inside the unit.