EN
9
3. PRACTICAL TIPS
WARNING: when sorting laundry, make
sure:
- have eliminated metallic objects such as
hair clips, pins, coins, from laundry;
- to have buttoned pillow cases, closed
zips, tied loose belts and long robe
ribbons;
- to have removed rollers, hooks or clips
from curtains;
- to have carefully read clothing washing
labels;
- to have removed any persistent stains
using specific detergents.
l
When washing rugs, bedcovers or other
heavy clothing, we recommend you avoid
the spinning cycle.
l
To wash wool, make sure the item can be
machine washed. Check the fabric label.
A guide environmentally friendly and
economic use of your appliance.
Maximise The Load Size
l
Achieve the best use of energy, water,
detergent and time by using the
recommended maximum load size.
Save up to 50% energy by washing a full
load instead of 2 half loads.
Do you need to pre-wash?
l
For heavily soiled laundry only!
SAVE detergent, time, water and
between 5 to 15% energy consumption
by NOT selecting Prewash for slight to
normally soiled laundry.
l
dried in stains in water before washing to
Following is a
quick guide
with tips and
recommendations on
detergent use at the
various temperatures
. In any case, always
read the instructions on the detergent for
correct use and doses.
Load tips
Helpful suggestions for the user
When washing heavily soiled whites,
we recommend using cotton
programs of 60°C
or above and a
normal washing powder (heavy duty)
that contains bleaching agents that at
EN
9
Option 2
the position of the plinth is set
back more than 55 mm from
the front of the furniture.
Note: components not supplied
-hinges
-supports
-door stop
l
Firstly , slide the dryer into an
opening of the size indicated in
the diagram
(figure 7)
.
Note: As soon as the hinges
are fixed on the furniture is not
possible to slide IN/OUT the dryer.
l
Fix the door to the furniture with
standard hinges and supports (not
supplied) and s top the door with a
std hook (not supplied)
(figure 8)
.
l
Now it’s possible to fix the hinges
to the door of the furniture.
l
Use the N° 4 mount caps (G)
to cover all the holes on the
front panel of the dryer.
GENERAL
l
If the distance from the top of
of the dryer and the Top of t
he
furniture is more than 10 mm ,
to
(figure 10)
.
Figure 9:
Pay attention to position
the bottom hinge 40 mm above
the kick plate in order to
facilitate its removal (figure 9).
EN
9
Option 2
the position of the plinth is set
back more than 55 mm from
the front of the furniture.
Note: components not supplied
-hinges
-supports
-door stop
l
Firstly , slide the dryer into an
opening of the size indicated in
the diagram
(figure 7)
.
Note: As soon as the hinges
are
fixed on the furniture it is not
possible to slide the dryer in and out.
l
Fix the door to the furniture with
standard hinges and supports (not
supplied) and stop the door with a
std hook (not supplied)
(figure 8)
.
l
Now it’s possible to fix the hinges
to the door of the furniture.
l
Use the N° 4 mount caps (G)
to cover all the holes on the
front panel of the dryer.
GENERAL
l
of the dryer and the top of the
furniture is more than 10 mm,
possible tilting
(figure 10)
.
Pay attention to position
the bottom hinge 40 mm above
the kick plate in order to
facilitate its removal (figure 9).
(QYLURQPHQWDO,VVXHV
$OO SDFNDJLQJ PDWHULDOV XVHG DUH
HQYLURQPHQWDOO\IULHQGO\ DQG UHF\FODEOH
3OHDVHKHOSGLVSRVHRIWKHSDFNDJLQJYLD
HQYLURQPHQWDOO\IULHQGO\ PHDQV <RXU
ORFDOFRXQFLOZLOOEHDEOHWRJLYH\RXGHWDLOV
RIFXUUHQWPHDQVRIGLVSRVDO
7RHQVXUHVDIHW\ZKHQGLVSRVLQJRIDQROG
WXPEOH GU\HU GLVFRQQHFW WKH PDLQV SOXJ
IURPWKHVRFNHWFXWWKHPDLQVSRZHUFDEOH
DQGGHVWUR\WKLVWRJHWKHUZLWKWKHSOXJ7R
SUHYHQW FKLOGUHQ VKXWWLQJ WKHPVHOYHV LQ
WKHPDFKLQHEUHDNWKHGRRUKLQJHVRUWKH
GRRUORFN
(XURSHDQ
'
LUHFWLYH
(
8
7KLVDSSOLDQFHLVPDUNHGDFFRUGLQJ
WRWKH(XURSHDQGLUHFWLYH(8
RQ:DVWH(OHFWULFDODQG(OHFWURQLF
(TXLSPHQW:(((
:((( FRQWDLQV ERWK SROOXWLQJ VXEVWDQFHV
ZKLFKFDQFDXVHQHJDWLYHFRQVHTXHQFHVIRU
WKHHQYLURQPHQWDQGEDVLFFRPSRQHQWVZKLFK
FDQEHUHXVHG,WLVLPSRUWDQWWRKDYH:(((
VXEMHFWHG WR VSHFLILF WUHDWPHQWV LQ RUGHU WR
UHPRYHDQGGLVSRVHSURSHUO\DOOSROOXWDQWVDQG
UHFRYHUDQGUHF\FOHDOOPDWHULDOV
,QGLYLGXDOV FDQ SOD\ DQ LPSRUWDQW UROH LQ
HQVXULQJ WKDW :((( GRHV QRW EHFRPH DQ
HQYLURQPHQWDO LVVXH LW LV HVVHQWLDO WR IROORZ
VRPHEDVLFUXOHV
:((( VKRXOG QRW EH WUHDWHG DV KRXVHKROG
ZDVWH
:(((VKRXOGEHKDQGHGRYHUWRWKHUHOHYDQW
FROOHFWLRQSRLQWVPDQDJHGE\WKHPXQLFLSDOLW\RU
E\UHJLVWHUHGFRPSDQLHV,QPDQ\FRXQWULHVIRU
ODUJH:(((KRPHFROOHFWLRQFRXOGEHSUHVHQW
,Q PDQ\ FRXQWULHV ZKHQ \RX EX\ D QHZ
DSSOLDQFHWKHROGRQHPD\EHUHWXUQHGWRWKH
UHWDLOHUZKRKDVWRFROOHFWLWIUHHRIFKDUJHRQD
RQHWRRQHEDVLVDVORQJDVWKHHTXLSPHQWLVRI
WKHVXSSOLHGHTXLSPHQW
Ɣ
Ɣ
Ɣ
DSSOLDQFHPXVWEHRIWKHVDPHW\SH
H[WHQVLRQOHDGV
<RXPD\EHFKDUJHGIRUDVHUYLFH
FDOOLIDSUREOHPZLWK\RXUPDFKLQHLV
FDXVHGE\LQFRUUHFWLQVWDOODWLRQ
2QFH
LQ
VKRXOG
HQVXUH
PDFKLQH
& R Q W D L Q V I O X R U L Q D W H G
J U H H Q K R X V H J D V H V
+HUPHWLFDOO\VHDOHG
*:3
7XPEOHGU\HUVDUHVXSSOLHGWRRSHUDWHDWD
YROWDJH RI 9 +] VLQJOH SKDVH
&KHFNWKDWWKHVXSSO\FLUFXLWLVUDWHGWRDWOHDVW
$
7KLVDSSOLDQFHPXVWEHHDUWKHG
-
Figure 8:
If the distance between the top
fix the N° 2 L metal brackets (K)
to the furniture sides
, to avoid
Figure 10:
