EN
64
TIPS FOR SAVING ENERGY
1. Install the appliance in a cool, well ventilated room , but not in direct
sunlight and not near a heat source (radiator, cooker.. etc). Otherwise
use an insulating plate.
2. Allow warm food and drinks to cool down outside the appliance.
3. When thawing frozen food, place it in the refrigerator compartment.
The low temperature of the frozen food will help to cool the refrigerator
compartment when it is thawing. This will help to save energy. If the
frozen food is put out, it results in a waste of energy.
4. Cover drinks or other liquids when placing them in the appliance
Otherwise humidity increases in the appliance. Therefore, the working
time gets longer. Also covering drinks and other liquids helps to
preserve smell and taste.
5. Try to avoid keeping the doors open for long periods or opening the
doors too frequently as warm air will enter the cabinet and cause the
compressor to switch on unnecessarily often.
6. Keep the covers of the different temperature compartments (crisper,
chiller ...etc ) closed
7. Door gasket must be clean and pliable. Replace gaskets if worn.
Energy Saving
•
For better energy saving we suggest :
•
Installing tge appliance away from heat sources and not exposed to
direct sunlight and in a well ventilated roo.
•
Avoid putting hot food into the refrigerator to avoid increasing the
internal temperature and therefore causing continuos functionaliting
of the compressor.
•
Do not excessively stuff foods so as to ensure proper air circulation.
•
Defrost the appliance in case there is ice to facilitate the transfer of
cold.
•
In case of absence of electrical energy, it is advisable to keep the
refrigerator door closed.
• Open or keep the doors of the appliance open as little as possible
•
Avoid adjusting the setting to temperatures too cold.
•
Remeve dust present on the rear of the appliance
