EN
45
THE VARIOUS FUNCTION AND POSSIBILITIES
Temperature settings
Cooling compartment
The thermostat ensures that the temperature settings in the cooling and
freezing compartments of your refrigerator
are controlled automatically. It may be used
to set to any value ranging from 1 to 6. As
you turn the thermostat setting knob from 1
to 6, the amount of cooling increases.
Cooling compartment thermostat knob:
5 - 6 : For more cooling.
3 - 5 : For normal use.
1 - 3 : For less cooling.
Warnings about temperature adjustments
•
It is not recommended that you operate your fridge in environments
colder than 10°C in terms of its efficiency.
•
The thermostat should be set according to the frequency of door
openings and the quantity of food kept inside the fridge.
• When you first switch on the appliance, you should ideally try to run
it without any food in for 24 hours and not open the door. If you need
to use it straight away, try not to put a large quantity of food inside.
•
A 5 minute delay function is included to prevent damage to the
compressor of your fridge, when you unplug it and then plug it in
again to operate it, or when an energy breakdown occurs. Your fridge
will start to operate normally after 5 minutes.
•
Your fridge is designed to operate in the ambient temperature intervals
stated in the standards, according to the climate class stated in the
information label. It is not recommended that your fridge is operated
in the environments which are out of the stated temperature intervals.
This will reduce the cooling
efficiency of the fridge.
•
This appliance is designed
for use at an ambient
temperature within the
10°C - 43°C range.
Thermostat knob
Climate
Class
Ambient Temperature
o
C
T
Between 16 and 43 (°C)
ST
Between 16 and 38 (°C)
N
Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)
