EN - 14 -
PART - 5.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
Replacing the light bulb
To replace the bulb in fridge compartment;
1-
Unplug your fridge freezer.
2-
Remove the cover of the box from the claws using a screwdriver.
3-
Replace with a bulb of maximum 15 W atts.
4-
Install the cover.
5-
W ait for 5 minutes before re-plugging and bring the thermostat to its original position.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and changing of Installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a
strong rope. The instructions written on the corrugated box must be followed while
transporting.
• Before transporting or changing the
installation position, all the moving
objects (ie,shelves,crisper…) should be
taken out or fixed with bands in order to
prevent them from getting damaged.
Carry your fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your refrigerator door, if the
door handle on your refrigerator is installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your refrigerator may be changed, you should
contact the nearest Authorised Service Agent to have the opening direction
changed.
Summary of Contents for CVDS 5162W
Page 99: ...PT 98 ...
Page 108: ...52235987 ...
