EN - 21
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
•
The original packaging and foam
may be kept for re-transportation
(optional).
•
Fasten your appliance with thick
packaging, bands or strong cords
and follow the instructions for
transportation on the packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and
so on) or fix them into the appliance
against shocks using bands when re-
positioning or transporting.
Always carry your appliance in the
upright position.
6.2 Repositioning the Door
•
It is not possible to change the
opening direction of your appliance
door if door handles are installed on
the front surface of the appliance
door.
•
It is possible to change the opening
direction of the door on models
without handles.
•
If the door-opening direction of your
appliance can be changed, contact
the nearest Authorised Service Centre
to change the opening direction.
7 BEFORE CALLING AFTER-
SALES SERVICE
If your refrigerator is not working properly,
there may be a minor problem. Check the
following.
The appliance does not operate
Check if:
•
There is power
•
The mains is connected
• The thermostat setting is on the “•”
position
• The socket is defective. To check this,
plug another working appliance into
the same socket.
The appliance performs poorly
Check if:
• The appliance is overloaded
•
The doors are closed properly
•
There is any dust on the condenser
•
There is enough space near the rear
and side walls.
The appliance is noisy
The cooling gas which circulates in the
refrigerator circuit may make a slight
noise (bubbling sound) even when the
compressor is not running. Do not worry,
this is normal. If you hear a different sound,
check whether:
• The appliance is level
•
Anything is touching the rear of the
appliance
• Objects in the appliance are vibrating.
There is water in the lower part of the
refrigerator
Check if:
The drain hole for the water is not clogged
(use defrost drain plug to clean the drain
hole).
Recommendations
•
If the appliance is switched off or
unplugged, wait at least 5 minutes
before plugging the appliance in
or restarting it in order to prevent
damage to the compressor.
•
The cooling unit of your refrigerator is
located at the rear of the appliance.
Therefore, water droplets or ice may
form on the rear surface of your
fridge due to the operation of the
compressor at specified intervals. This
is normal, there is no need to perform
a defrosting operation unless there is
excessive ice.
•
If you do not intend to use your fridge
for a long period of time (such as
during the summer holidays), set
the thermostat to “•” position, defrost
and clean your fridge, leaving the
Summary of Contents for CVS 5166WK
