DOOR and FILTER
EN 10
Opening the Door
Pull on handle to open
the door.
To restart the dryer,
close the door and
press
.
WARNING!
When the tumble dryer is in
use the
drum and door may be VERY HOT.
Never stop a tumble dryer before
the end of the
drying cycle unless
all items are quickly
removed and
spread out so that the heat is
dissipated.
Filter Care Indicator
Lights when the filter
needs cleaning.
Check and clean the
main filter in the door
and the condenser
filters allocated in the
bottom of the dryer,If
the laundry is not
drying check that the
filter is not clogged.
DO NOT USE WATER TO CLEAN THE FILTER.
Filter
IMPORTANT:
To maintain the efficiency of the
dryer check that the fluff filter is clean before
each drying cycle.
Do not operate the dryer without the filters.
Clogged filters can increase the drying time
and cause damage which may result in
expensive repair costs.
1 .
P u l l t h e f i l t e r
upwards.
2.
Open filter as shown.
3.
Gently remove lint
using a soft brush or
your fingertips.
4
. S n a p t h e f i l t e r
together and push
back into
place.
To Clean the Condenser Filter
1 .
R e m o v e t h e
kickplate
.
2.
Turn the two locking
levers anti-clockwise
and pull out the front
cover.
3.
Gently remove
the
filter frame and clean
any dust or fluff with a
cloth from the filter. Do
not use water to clean
the filter.
4. Remove the sponge
gently from its place
and then wash the
sponge by holding it
under a running tap
turning it so to remove
any dust or fluff.
5.
Refit the
front cover
ensuring it is in the
c o r r e c t w a y ( a s
indicated by the arrow)
and pushed firmly into
place. Lock the two
levers by turning them
clockwise.
6.
Refit the kickplate.
Summary of Contents for GCH 970NA2T
Page 38: ...40008074 ...
