EN
73
PAUSING THE MACHINE
l
While a cycle is running, the machine can
be paused by simply pressing the
PLAY/PAUSE
button.
l
Press the
PLAY/PAUSE
button again to
resume the programme from the cycle
phase where it left off.
CANCELLING THE SET PROGRAMME
l
To cancel the programme, turn the
SMART RING
to the
OFF
position.
l
Wait until the DOOR LOCKED light has
gone out before opening the door.
l
This button allows you to pre-programme
the wash cycle to delay the start of the
cycle for up to
24 hours
.
l
To delay the start use the following
procedure:
- Select the required programme.
- Press the button once to activate the
delay start and then press it again (or
hold it) to set the desired delay. The
delay increases each time the button is
pressed up to
24 hours,
at which point
pressing the button again will reset the
delay start to zero.
- Confirm by pressing the
PLAY/PAUSE
button. The delay countdown will begin
and when it has finished the programme
will start automatically.
l
You can cancel the start delay by turning
the
SMART RING
to the
OFF
position.
If there is a break in the power supply
whilst the machine is operating, when
the power is restored, the machine will
restart from the beginning of the phase it
was in when the power was lost.
This button allows you to choose between
three
different options:
- PREWASH
l
This option allows you to make a prewash
and it is particularly useful for heavily
soiled loads
(can be used only on some
programmes as shown in the table of
programmes)
.
l
We recommend you use only 20% of the
recommended quantities shown on the
detergent pack.
- EXTRA RINSE
l
This option allows you to add one rinse at
the end of the washing cycle and is useful
for people with delicate and sensitive
skin, for which a small amount of
detergent residue can cause irritations or
allergies.
l
It is advisable to also use this function for
the children clothes and for the washing
of heavily soiled items, which requires a
lot of detergent to be used, or for the
washing of toweling items whose fibres
mostly have the tendency to hold the
detergent.
- EASY IRON (STEAM)
l
By this option you can add a specific
steam treatment to some washing cycles
(see programme table).
For safety reasons, in some wash
cycle phases, the door can be opened
only if the level of the water is below
its lower edge and if the temperature
is less than 45°C. If these conditions
are met, wait for the DOOR LOCKED
light to switch off before opening the
door.
DELAY START button
The following options must be
selected before pressing the PLAY/
PAUSE button.
OPTIONS button
Summary of Contents for RPD 4106BWMBC-S
