EN
75
l
To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
l
It is possible to modify the spin speed
without pausing the machine.
This button can be used to select
three
different functions,
depending on the
selected programme:
- STAIN LEVEL button
l
Once the programme has been selected
the wash time set for that programme will
be automatically shown.
l
This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled
(can
only be used on some programmes as
shown in the table of programmes)
.
- ALTERNATIVE PROGRAMME
SELECTION
Where shown in the table, this option
permits selection of an alternative to the
pre-set programme (in the case of the
RAPID (14'/30'/44')
programme, it allows
you to choose one of the three available
durations).
- STEAM LEVEL
After selecting the
EASY IRON PLUS
programme, you can use this button to
choose between three steam treatments of
different intensities, designed for dry or wet
garments and depending on the type of
fabric:
- COTTON (default selection)
This programme is used for cotton
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- SYNTHETIC (press button once)
This programme is used for synthetic
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- DELICATES (press button twice)
With the help of steam, the cycle
refreshes and relaxes creases in
garments after use. The programme
consists of an initial phase in which the
steam acts and a final phase in which
the excess humidity is removed for
immediate use. The cycle is suitable for
dry fabrics.
l
Pressing simultaneously the buttons
"F"
and
"G"
for about
3 seconds
, the
machine allows you to lock the keys. In
this way, you can avoid making
accidental or unwanted changes if a
button on the display is pressed
accidently during a cycle.
l
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
The machine is fitted with a special
electronic device, which prevents the
spin cycle should the load be
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION/
STEAM LEVEL
button
CHILD LOCK
Summary of Contents for RPD 4106BWMBC-S
