76
The display’s indicator system allows you to
be constantly informed about the status of
the machine.
1) WASH TEMPERATURE INDICATOR LIGHTS
This show the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button. If
you want carry out a cold wash all the
indicators must be off.
2) SPIN SPEED INDICATOR LIGHTS
This show the spin speed of the selected
programme, you can reduce or omit by the
relevant button.
3) DOOR LOCKED INDICATOR LIGHT
l
The indicator light is illuminated when the
door is fully closed.
l
When
PLAY/PAUSE
is pressed on the
machine with the door closed, the
indicator will flash momentarily and then
illuminate.
l
Wait until the DOOR LOCKED light has
gone out before opening the door.
4) Kg Detector
(function active only on
certain programmes)
l
During the first minutes of the cycle, the
"Kg Detector"
indicator remain on while
the intelligent sensor will weigh the
laundry and adjust the cycle time, water
and electricity consumption accordingly.
l
Through every wash phase
"Kg Detector"
allows to monitor information on the wash
load in the drum and in the first minutes
of the wash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of
fabric selected to be washed it;
- adjusts the rhythm of drum rotation for
the type of fabric being washed;
- recognizes the presence of lather,
increasing, if necessary, the amount of
water during rinsing;
- adjusts the spin speed according to the
load, thus avoiding any imbalance.
5) KEY LOCK INDICATOR LIGHT
The indicator light show that the keys
are locked.
6) OPTIONS INDICATOR LIGHTS
The indicator lights show the option that
can be selected by the relevant button.
7) SPECIAL PROGRAMMES INDICATOR
LIGHTS
The indicator lights show the option that
can be selected by the relevant button.
8) STAIN LEVEL INDICATOR LIGHT
The indicator light shows the selection of
the relevant option.
Digital display
Close the door BEFORE selecting the
PLAY/PAUSE button.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door in
the proper way and press the
PLAY/PAUSE button.
Summary of Contents for RPD 4106BWMBC-S
