11
REPLACEMENT OF THE BATTERIES – SEE FIGURE 14
We recommend you to place the battery at the battery compartment of the vibration mechanism, before installing
the mechanism of the bouncer. In order to place 1 pc 1.5V D LR20 battery in the battery compartment of the
mechanism for gentle vibration:·
1. Loosen the screws of the lid of the battery compartment with a Phillips screwdriver and remove it.
2. Place 1 pc 1.5V D (LR20) alkaline battery at the battery compartment by observing the correct polarity,
indicated at the bottom of the compartment.
Advice:
We recommend you to use alkaline batteries.
3. Afterwards place the lid of the battery compartment back and tighten the screws .
Note:
If the vibration unit starts to operate erratically,
you should restart the electronic mechanism. Turn the power switch off, wait a minute and turn it back on.
IMPORTANT!
If the vibrations become weak or if there are no vibrations, the probable reason is that the battery
has discharged. You should replace it with a new D(LR20) alkaline battery; and throw the discharged battery at a
designated place.
Note:
Do not throw away in the containers for household waste.
Warning! Recommendations for operation with the battery;
• Only an adult should operate with the battery.
• If you are not going to use the product for a long time, remove the battery from it.
• The battery, that has no more charge, should be removed from the toy immediately. Throw it at the designated
places, not in the containers for household waste.
• When replacing the wasted battery, always change it with a new one.
• Do not throw the battery in fire, because there is danger of explosion or leakage.
• Battery that is not rechargeable, should not be recharged.
• Use only the type of battery recommended by the manufacturer.
• If you use rechargeable batteries, firstly it is necessary for you to remove them from the product and afterwards
they should be charged under adult supervision only.
• Never shorten the terminals of the battery.
• Protect the environment by not throwing this product with the household waste. For consultation and advice on
the ways and places to recycle contact your local authority dealing with the environment.
CLEANING AND MAINTENANCE OF THE BOUNCER
А. Cleaning:
1. The cover of the bouncer can be removed in order to be cleaned better:
• Remove the cover by unhooking the fixing belts and remove the upper rear pocket from the rear frame of the
backrest.
• The cover is cleaned with soft cloth wetted with warm water and soft soap, but NOT in a washing machine.
Wipe after that using clean wetted cloth with warm water only.
• After cleaning let the bouncer dry well before use. It is absolutely forbidden for you to store it before it has dried
completely.
• Do not use strong cleaning agents, bleach or agents with abrasive particles, in order to clean the product.
• It is forbidden to wash it in a washing machine, drier, dry cleaners, whitening or tumble-drying.
2. The plastic parts should be cleaned with wet soft cloth and dry with a dry soft cloth.
DO NOT USE WET WIPES, STRONG CLEANING AGENTS OR ONES WITH ABRASIVE PARTICLES!
3. The toys should be cleaned with soft slightly moist cloth.
DO NOT GET THEM WET!
B. Maintenance:
1. Regularly check the fixed and moving parts, whether there is anything loose or broken and for damage. If you
find any damage, please stop using the bouncer until the damaged part is removed. Do not repair the product by
yourself, first contact an authorized service or the shop you have bought the product from. Otherwise your
warranty will be annulled.
2. Regularly clean the bouncer.
3. Do not leave the product exposed to the harmful effects of the external factors – direct Sun light, rain, snow or
wind. This may lead to damage of the metal and plastic parts and fading of the bouncer.
7. When you do not use the product, please store it at dry and well ventilated places, not at dusty, wet rooms
with temperatures that are very low or very high.
