Enter 132 End
*/$%ENTR* *ZEND*
Setting up your Operation Modes
7
7-2-3-20.
Set Suffix Code
In the process of transmitting data, Suffix Code is normally interposed between barcode
data and Postamble Code as a user-defined string to format the output data. By binding
this configurable parameter with parameter value which is identifiable for you to achieve
the attempt, Suffix Code is meant to identify the difference among lines, whereas
functionality of Postamble Code is to arrange the data format by breaking the
transmission line. Please follow the below steps to configure Suffix Code.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
SuffixChar
barcode to configure Suffix Code.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the
appendix to scan hexadecimal value barcodes representing the desired string
which has to be at most 8 characters in length. For instance, to set suffix code to
be “EFGH”, scan
4, 5, 4, 6, 4, 7, 4,
and then
8
to assign the specified hexadecimal
value "45464748".
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
*B58E5*
SuffixChar
B58E5
(Length: 8 digits)
