Enter 169 End
*/$%ENTR* *ZEND*
Setting up your Operation Modes
7
7-4-1-19.
Set Time Delay for a Specified Digit for HID
This parameter refers to the amount of elapsed time to delay transmitting a specified
character. Please follow the below steps to set time delay for transmitting a specified digit
if the associated operations are performed using USB HID interfaces.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
BtHidTxExtTime
barcode to configure delay time for a specified digit for
HID.
(3)
Please refer to Decimal/Hexadecimal Table in the appendix to scan decimal value
barcodes representing the desired value in the range of 0 to 255. For instance, to
defer transmitting a digit for 1 seconds, then scan
1
to assign the specified
decimal value “1”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
*ADCE0*
BtHidTxExtTime
ADCE0
(Length: 1 digit / Range: 0-255/ Unit: 1000ms)
