Enter 206 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
8-6-6.
Transmit Check Digit
Scan the appropriate barcode to determine whether to transmit the check digit.
8-6-7.
Verify Check Digit
Check digit algorithms provide the error-detection functions. When this feature is enabled,
the device will only decode the barcodes which contain check digit to authenticate the
decoded barcodes. Scan the appropriate barcode to determine whether to verify check digit.
8-6-8.
Configure Length Qualification
With length qualification the scanner will filter out the inappropriate barcodes whose lengths
are out of range. Scan
Min
barcode to specify the minimum length which the valid code at
least has to be;
Fixed
barcode requires the scanned code length to necessarily agree with
certain fixed number
;
Min/Max
barcode is to confirm whether the barcode length falls in
between maximum and minimum. However, to make this parameter work effectively, you
have to configure the length scale simultaneously. Please refer to
Section 8-6-10
for more
details about configurations of the length scale.
*40541*
Enable
40541
*40540*
Disable
40540
*404C1*
Enable
404C1
*404C0*
Disable
404C0
*40591*
Enable
40591
*40590*
Disable
40590
