Enter 218 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
8-9-9.
Remove Trailing Characters for Code39
TrunEnd
parameter allows you to specify the number of characters which you intend to
remove backwards from the end of Code39 barcode. In doing so, you are able to format the
decoded message beforehand by taking out the necessary barcode parts and preserve the
desired segments for your benefit. Follow the below procedure to complete the
configuration:
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
TrunEnd
barcode to specify the number of characters to delete backwards from
the end of the decoded data.
(3)
Please refer to Decimal/Hexadecimal Table in the appendix to scan decimal value
barcodes representing the desired number in the range of 0 to 255. For instance, to
remove the last two digits out of every Code 39 symbol, then scan
2
to assign the
specified decimal value “2”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
*C56E0*
TrunEnd
C56E0
(Length: 1 digit / Range: 0-255)
