Enter 76 End
*/$%ENTR* *ZEND*
Editing General Settings
6
6-2-3.
Set Time Format
Scan the appropriate barcode to specify the time format.
6-2-4.
Set Charge Rate
Scan the appropriate barcode to specify the charge rate.
6-2-5.
Set the Workflow of Operation Modes Switch
This parameter specifies how the device switches among different operation modes. With
StdMode
setting, the operation mode will compulsorily switch to Cable mode when the
device is connected with a cable. At the moment, the scanner is not able to switch to other
modes unless the cable is unplugged from the scanner. Without the cable plugged in, the
device will switch back to the previous operation mode, and Cable mode becomes
unavailable. Conversely, if you wish the operation mode would remain the same or demand
full availability of three operation modes, no matter whether the cable is plugged in or not,
then scan
Disable
label to achieve the attempt.
*A4380*
Slow
A4380
*A4381*
Quick
A4381
*A42A0*
HHMMSS
A42A0
*A42A1*
HHMM
A42A1
*A42A2*
MMSS
A42A2
*A4320*
Disable
A4320
*A4321*
StdMode
A4321
