Enter 117 End
*/$%ENTR* *ZEND*
6. Memory / Bluetooth / Cable General Setting
6-3-4
Composite Triggers Functionality
ctionality
Some supplementary functions are necessarily executed by using composite
triggers though Scan Button primarily serves to scan barcodes and Small
Trigger to initiate data transmission. In Cable mode, battery charge is an extra
function which can be initiated by pressing Small Trigger and Scan Button in a
specified sequence described below: while holding Small Trigger till the green
LED light starts flashing rapidly, press down Scan Button at the same time and
then release both buttons. Scan the appropriate label to enable or disable
functionality of battery charge.
*4HW0*
Disable
*4HW1*
ChgSw
6-3-5
Small Trigger Functionality
Small Trigger is designed to perform various supplementary operations, from
initiating battery charge to switching to data transmission mode, according to
the length of time the button has been pressed. To facilitate the associated
operations with Small Trigger, this parameter is available to specify the degree
of Small Trigger’s functionality. Scan
Disable
label to specify Small Trigger will
not provide any additional function. On the other hand, when
Mem Tx
is
enabled, the device is able to switch to data transmission mode by keep
holding Small Trigger till the green LED as solid color, then release Small
Trigger to into Transmit mode; at this moment, push Scan key will transmit the
stored data.
*5HX0*
Disable
*5HX2*
MemTx
6-3-4 Composite Triggers Functionality
6-3-5
Small Trigger Functionality
