Fig 1.1
2) Install USB driver, users can find the USB driver on the attached DVD (file name:
USB Driver
), the USB driver can be installed for Microsoft
Windows 8, 7, XP, Vistar. User can easily install USB driver, the USB driver can automatically install the driver when user execute it.
3) Turn on Laptop/UMPC, please identify which COM port has been used (occupied) by USB GPS Dongle. The ways how to check COM port has
been used by
GPS/GLONASS USB Dongle
are as following ; Double clicks
“Control panel ( C )“
Double clicks
“System”
Click
“hardware”
Click
“Hardware Manager”
Double clicks
“COM Port”,
then user can find which COM port has been occupied by
GPS/GLONASS USB Dongle.
4) Load your GPS mapping or routing software, along with the corresponding maps of the areas that you are occupying or plan
to travel. Start the application. Make sure the application is set for the COM port that your Laptop/UMPC device will use for
serial communication. Now you should be ready to use your GPS/GLONASS application as directed by the user documentation that
came with the software. More configurations may be necessary.
5) eMap will search GPS/GLONASS satellites automatically, users’ current position will be showed in the eMap after 3 satellites has
been
