running engine or when it's hot. Do not inhale fuel fumes as they are toxic.
–
Do not attempt to repair the machine unless you are qualified to do so.
–
Do not use the machine with a damaged or excessively worn cutting device.
–
To reduce the risk of fire, keep the engine and muffler free from debris, leaves or
excessive lubricant.
–
Always make sure that all handles and guards are installed when operating the
machine.
–
Never attempt to use an incomplete machine or a machine equipped with an
unauthorized modification.
–
When transporting or storing the machine, always install the cutting device
protection if provided.
–
Always be aware of your environment and pay attention to possible dangers that
cannot be heard due to the noise of the machine.
–
Keep people and animals away from the work area. Children and people who do
not know how to use this tool should not touch it and handle it.
–
Use the product only under daylight or under good artificial light.
–
Wh
en using the machine, always wear full protective equipment including a
helmet,protective mask, ear protection, gloves, non-slip footwear and protective
clothing.
–
Wear appropriate clothing. Do not wear loose or unbuttoned shirts. Do not wear
jewellery that may come in contact with moving parts. If you have long hair, tie them
down and wear an appropriate safety helmet.
–
Do not operate the product with damaged guards or shields not in place.
–
Keep hands and feet away from the unit at all times, especially when turning the
tool off and on.
–
Do not use the tool in an area where ventilation is poor. Gas emissions can cause
injury.
–
Do not work when it rains and in bad weather. Do not use the tool in damp
locations.
–
Do not use the tool in the presence of flammable liquids or gases.
–
Caution: The machine releases gases when it is used. Avoid coming into contact
with these gases.
–
Keep the work area clear. Before working, inspect the work area and remove any
materials or objects that could cause accidents.
–
Do not force the tool.
–
Keep the tool and drill clean for better and safer performance. Follow the
instructions in this manual to lubricate and change the accessories.
–
Always inspect the machine before and after operation. If the tool is damaged or
faulty, stop using the tool and bring it to an authorized service for inspection and
repair.
–
Turn off the tool after use, when you leave it unattended, when changing these
accessories and before servicing.
