CANNON Instrument Company® | Getting Started
9
11.
Measure, cut, and install the 6 mm blue FEP tubing as exhaust tubing.
Fill the Bath
The temperature bath must be filled with the appropriate silicone fluid prior to operation. The viscosity
of the fluid depends upon the temperature of the bath during most operations. Refer to Table 6 for
proper bath fluid selection.
Table 6 — Silicone Bath Fluid Selection
Bath operating range Recommended bath fluid viscosity
20 °C to 100 °C
10 cSt
101 °C to 150 °C
20 cSt
Figure 4 — Filling and Draining the Bath
Warning:
Follow all lab policies regarding the safe handling and disposal of all
hazardous materials.
Display Hood
Bath
