10
OVEN TIMER OPERATION
Step 4 Press & hold in the “Cook Period” button, the display will read 0.00 and the
cookpot ( ) symbol will light up.
With the Cook Period button still held set the required Cook Period using the “+”
and “–” buttons. Example: 1hr 30 minutes (as shown).
Note: Cook Period is the length of time the food requires to cook.
Step 5 Release all buttons.
The timer display will revert to the time of day with the Auto symbol lit & Cookpot
symbol remaining lit.
At the end of the Cook Period the “Auto” symbol will flash and an intermittent
bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless cancelled.
The “Auto” symbol will continue to flash until the timer is returned to Manual
operation (see below).
Step 6 Press the manual button to cancel the bleeping.
(If 2 minutes has not elapsed)
Step 7 Turn the oven control(s) to the OFF position.
Step 8 Press the “Manual” button again to return the cooker to Manual operation.
(The Auto symbol will go out).
b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY AFTER A SET COOK
PERIOD
Step 1
Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 2
Place food onto the correct shelf position in the oven and close the oven door(s).
Step 3
Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven
function.
Note 1
When cooking automatically the Cook Period can be checked at any time by simply
pressing the Cook Period button.
Note 2
When cooking automatically the End Time can be checked at any time by simply
pressing the End Time button.
NOTE: The Cookpot symbol disappears