Cannondale 2012 RZ ONE TWENTY, Owner'S Manual Supplement

7

126694.PDF

68mm 

A

D

A

PTE

R

R

EMOV

A

L

The following procedure should only be completed by a professional bike mechanic.  

The adapter is removable, how-

ever, repeated removal and reinstallation could result in damage to the SI BB shell and is not recommended.    

1.  Removal of the SI BB ADAPTER is accomplished through the use of the extraction tool 

KF366/

 , a two-piece tool set used with 

a headset bearing press.  The arrangement of the tool parts for removal is shown next figure.

2.  Press the adapter out of the shell using the headset press. 

Following removal, it will be necessary to clean  all remaining Loctite residue using Loctite 768.  Use a dental pick to remove 
any adhesive from the grooves.  Do not cut, face, or use abrasives to clean the inside if the BB shell.   

For Loctite clean-up 

instructions : 

 http://tds.loctite.com/

(Headset press not shown)

KF366/

 EXTRACTION TOOL

D

R

IVE SIDE

Receiver

Press

ADAPTER

N

OTICE

Use only  extraction tool  Cannondale 

KF366/

  and a headset press.   Do not use other tools.

Make sure the Reciever part of the tool is centered on the drive side bottom bracket shell  while pressing.

We strongly recommend that your have this procedure performed by an Authorized Cannondale Dealer.  Damage caused by 
improper removal is not covered under your warranty.