Esp
añol
ITal
Ia
No
NEDER
la
ND
s
FR
aNÇ
aI
s
DEUT
sCH
ENGLISH
20
headshok susPensIon fork
fatty w/DL50
Some models E-Series bicycle are equipped with a Cannondale Headshok Fatty suspension fork. The fork features the DL50 damping
cartridge. The internal spring size can be changed to accomodate various rider weights to tune performance. This fork is designed for a 700c
wheel. The brake mounts are international standard. The fork features several accessory mounting points as shown in the figure, next page.
To operate fork lockout:
See Figure 12. The lockout lever turns fork travel “on” and “off.” Be sure to rotate the lever completely to either position until
it stops.
To change the lever position:
Remove the retaining screw with a 3 mm Allen key andcarefully lift off the lockout lever with your fingers. Reposition the
lever while aligning it with the large nut. Press it onto the large nut. Reinstall the retaining screw and tighten to 0.5 Nm, 4
in Lbs.
Figure 12.
NOTICE
Do not force lever past the stop. Do not try to unthread the large nut under the lever. It is pressed on!
To change the adjustable stem:
See Figure 13. The angle of the handlebar can be raised or lowered depending on your preference. To change handlebar
height, loosen the stem angle fixing bolt (23), then raise or lower the handlebar . When the handlebar is in the desired
position, use a torque wrench to tighten the fixing bolt to 17-18Nm.
ON
OFF
