Cannondale Adventure Neo, Owner'S Manual Supplement

19

Technical Information

Drive System Display - BOSCH Purion

 WARNING:  This page contains selected information only.  Download the complete manufacturer manual, 

 or check for updated content, 

see https://www.bosch-ebike.com/

.

The following assistance levels are available as a max-

imum:

– OFF: Motor assistance is switched off. The eBike

can just be moved by pedaling, as with a normal bi-

cycle. The push assistance cannot be activated at

this assistance level.

– ECO: Effective assistance with maximum efficiency,

for maximum range

– TOUR: Steady assistance, long range for touring
– SPORT/eMTB:

SPORT: Powerful assistance, for mountain biking

and for cycling in urban traffic

eMTB: Optimum assistance whatever the terrain,

rapid acceleration when starting from a standstill,

improved dynamics, top performance (eMTB is

only available in combination with drive units

BDU250P CX, BDU365, BDU450 CX and BDU480

CX. This also requires a software update.)

– TURBO: Maximum assistance even at high pedaling

speeds, for biking sports

To increase the assistance level, briefly   press the

button + (6) on the on-board computer repeatedly

until the required assistance level appears on the in-

dicator (i). To decrease the assistance level briefly

press   the button 

– (5).

If the display is set to TRIP, TOTAL or RANGE, the se-

lected assistance level will only be shown briefly (for

approx. one second) on the display when switching

over.

Switching bike lights on/off

For the model which has the bike lights powered by

the eBike system, a medium-length press   of the but-

ton + will switch on the front and rear lights simulta-

neously. To switch off the bike lights, press and hold

 the button +.

The lighting symbol (h) is displayed when the light is

on.

The on-board computer saves the light status and ac-

tivates this saved status accordingly after a restart.

Switching the bike lights on and off has no effect on

the backlight of the display.

Speed and distance indicators

((jj))

((ii))

((aa))

((bb))

((cc))

((dd))

((ee))

((hh))

((gg))

((ff))

The speedometer (a) always displays the current

speed.
The indicator (i) always displays the last setting as

standard. Repeated medium-length presses   of the

button – will display the trip distance TRIP, the total

distance TOTAL and the battery range RANGE one af-

ter the other. (Briefly pressing   the button 

– will de-

crease the assistance level.)
To reset the trip distance TRIP, select the trip dis-

tance TRIP and simultaneously press and hold   the

buttons + and –. The display will initially show RE-

SET. If you continue to press both buttons, the trip

distance TRIP will be set to 0.
To reset the battery range RANGE, select the battery

range RANGE and simultaneously press and hold 

the buttons + and –. The display will initially show RE-

SET. If you continue to press both buttons, the trip

distance TRIP will be set to 0.

You can switch the displayed values from kilometers

to miles by holding down   the button 

– and briefly

pressing  the on/off button (1).

The versions of the subsystems and their model part

numbers can be displayed for servicing purposes,

provided the subsystems divulge this information

(dependent on the subsystem). With the system

switched off, simultaneously press the buttons – and

+ and then press the on/off button (1).

English – ​7

Bosch eBike Systems

1 270 U020 XBP | (14.02.2019)