Some final pre-ride checks.
Torque Bolts.
Select the correct bit for the stem faceplate bolts and
install it into the torque wrench.
Look for torque specification markings on the front and back of
the stem, as well as the head of the seatpost. If these markings are
absent, torque all stem and seatpost bolts to 7 Nm.
Tighten the stem bolts in an “X” pattern, ensuring the gap between
the faceplate and stem remains even.
Seat Height.
Adjust seat height by loosening the seatpost wedge.
Position the saddle so it’s the same height as your hip. Align the
saddle with the frame and tighten the seatpost wedge. When riding,
you should have a slight bend in your knee when the pedal is at the
bottom of its rotation.
A.
B.
C.
D.
SET-UP
STEP 2
STEP 1
STEP 3
STEP 4
PRE-RIDE CHECK
A
B
C
D
Summary of Contents for Carbon Road Disc
Page 1: ...Carbon Road Disc Quick Start Guide Applies to Topstone Carbon Synapse Carbon Super X...
Page 14: ...Welcome to the family ridecannondale...
Page 15: ......
Page 16: ......
