SET-UP
STEP 2
STEP 1
STEP 3
STEP 4
PRE-RIDE CHECK
Step 2. Install your seat post.
Locate the seatpost wedge in the parts bag. Identify the rounded
face on the wedge assembly and cover it with the provided grease.
Do NOT use carbon paste on this surface.
Use an Allen wrench to help guide the wedge into position in the
frame. Firmly push the seatpost wedge into the frame.
Apply carbon paste to the back of the seatpost wedge assembly and
the inside of the seat tube.
Locate the minimum insertion line on the seatpost.
Insert the seatpost into the frame beyond the minimum insertion line,
then hand tighten the seatpost wedge using the Allen key, enough so
the seatpost can’t be pulled from the frame. It will be fully tightened
later.
Carefully lift the bike from the box and gently place the fork ends on
the ground.
A.
B.
C.
D.
E.
F.
A
B
C
E
D
Summary of Contents for Carbon Road Disc
Page 1: ...Carbon Road Disc Quick Start Guide Applies to Topstone Carbon Synapse Carbon Super X...
Page 14: ...Welcome to the family ridecannondale...
Page 15: ......
Page 16: ......
