Getting your bike ready for assembly.
Let’s get your bike out of the box.
This video applies to three Cannondale Platforms:
• Habit Neo, Moterra Neo, Cujo Neo 130
Tools Needed:
• Flat-Head Screwdriver
• Phillips-Head Screwdriver
• Box Cutter
• Scissors
Tools Included:
• Torque Wrench
• Allen Keys
• Pedal Wrench
Gently lift your bike out of the box and set
it on top of the box. Make sure the attached
wheel is facing upwards
Use a flat head screwdriver to carefully open the upper flap of the
box.
Prior to assembling your bike, review the pre-ride checklist and
Assembly Instruction Guide. Confirm that a builder has completed
the checklist.
Carefully lift the bike out of the box and set it onto the top of the box.
Remove the front wheel from the bike by carefully removing the zip
ties or Velcro, then remove all packaging from the wheel and set it
aside.
Remove all additional packaging from the bike.
A.
B.
C.
D.
E.
C
SET-UP
STEP 2
STEP 1
STEP 3
PRE-RIDE CHECK
Summary of Contents for Full-Suspension EBike
Page 1: ...Full Suspension EBike Quick Start Guide Applies to Habit Neo Moterra Neo Cujo Neo 130...
Page 14: ...Welcome to the family ridecannondale...
Page 15: ......
Page 16: ......
