Lift the entire bike up off the box and set the
rear end into the standing box.
The front fork should rest over the edge of the
box.
Let’s get your bike out of the box.
Carefully lift and rotate the bike, lowering it gently back into the box
with the fork overhanging the side of the box. Let the handlebar
gently hang from the frame.
Inside the small box, you’ll find tools necessary for assembly, including
a 15mm pedal wrench, torque wrench and hex wrenches specific to
the bolts on your bike.
Once the bike is assembled, but before you ride, please read the
owner’s manual.
Locate and remove the warranty card and set it aside with the owner’s
manual.
IMPORTANT: Do not turn your e-bike on during the assembly
process.
F.
G.
H.
I.
F
SET-UP
STEP 2
STEP 1
STEP 3
PRE-RIDE CHECK
Summary of Contents for Full-Suspension EBike
Page 1: ...Full Suspension EBike Quick Start Guide Applies to Habit Neo Moterra Neo Cujo Neo 130...
Page 14: ...Welcome to the family ridecannondale...
Page 15: ......
Page 16: ......
