background image

JCH/PCA 111199 #109382

©Cannondale Corp. 1999, 16 Trowbridge Dr., Bethel, CT

CANNONDALE WARRANTY

Your Cannondale Jekyll frame is warrantied against manufacturing
defects in materials and/or workmanship for the lifetime of the original
owner. Under this warranty we will repair any defective frame, or at our
discretion, we will replace a defective frame with the same or comparable
model (due to product evolution). See the standard Cannondale Owner’s
Manual for more details.

All other components, including HeadShok forks, suspension parts, 
frame fixtures and finishes (paint and decals) are warrantied against
manufacturing defects in materials and/or workmanship for a period 
of one year from the date of purchase.

For complete information regarding your Cannondale Limited Warranty,
please refer to your Cannondale Bicycle Owner’s Manual.

For warranty related questions or for more information on this or any
Cannondale product, please feel free to contact us.

USA and Canada:

(800) BIKE-USA

Europe (EC):

(31) 541-573580

Japan:

(81) 722-99-9399

Australia:

(61) 2-9979-5851

http://www.cannondale.com
custserv@cannondale.com

Summary of Contents for Jekyll

















Reviews: