15
126560.PDF
Maintenance & Service Information
WARNINGS
HIGH-PRESSURE HAZARD - Do not open, disassemble, modify, or attempt to perform internal service to the shock.
The DYAD RT2 shock is not user serviceable. Never attempt to remove the spool chamber end caps for any reason! Attempting
to perform any mechanical service procedure on this shock can potentially result in serious injury or death. Remote lever cable
installation must be performed by a professional bike mechanic.
All service and repair must only be performed by FOX Racing Shox or an FOX Authorized Service Center.
For more informatiomn contact: http://www.foxracingshox.com/fox/contact
Frame Installation
Please note that the DYAD RT2 is to be mounted only in the frame in the position shown below.
Pre-Ride Checks
1. Clean the outside of your shock with soap and water and wipe dry with a soft dry rag. Inspect the entire exterior of the shock.
DO NOT RIDE THE SHOCK IF YOU FIND DAMAGE.
Please contact FOX Racing Shox for further inspection and repair.
2. Set Sag. See
Setting Sag.
3.
Set Rebound. See
Setting Rebound
.
Summary of Contents for Jekyll
Page 27: ......
