19
126560.PDF
Setting Travel
The DYAD RT2 has two travel modes, activated by the remote handlebar-mounted lever. Switching between the modes
changes the bike’s sag and BB height, offering a higher BB and steeper angles for climbing, or a lower BB and slacker angles for
descending, keeping the rider in the proper position for the terrain. It is fundamentally like having two different bikes available
to you at the flick of a switch.
To operate remote lever :
Push the lever forward until it clicks into place in the ELEVATE 90 mm position.
Press the lever button to release the lever and allow cable tension to return the lever to the FLOW 150 mm position.
ELEVATE 90 mm
FLOW 150 mm
A (short travel) mode with low volume air shock
for providing a firm, progressive spring rate, XC type
damping circuits for trail riding, rolling terrain, and
climbing performance.
Spring Rate is Steeper
Sag is cut to 60%
BB is higher / Steep Geometry
DYAD RT2’s L.A.S. (linear airspring technology) provides
a spring rate that is virtually identical to a coil spring and
mates it with speed sensitive DH style damping circuits
tuned for maximum descending performance.
Spring rate is softer.
Sag is 100%
BB is lower / Stable Geometry
Summary of Contents for Jekyll
Page 27: ......
