background image

2

SAfeTy INfoRmATIoN

LEFTY  

MODEL

TRAVEL/  

WHEEL SIZE 

mm/in 

INTENDED USE

OLIVER

30/650B

General Purpose 

Riding, ASTM 

CONDITION 2

For use in extreme forms of jumping/riding such as hardcore 
mountain, Freeriding, Downhill, North Shore, Dirt Jumping, 
Hucking etc.

WARNING

UNDERSTAND YOUR LEFTY AND ITS 

INTENDED USE. USING YOUR LEFTY THE 

WRONG WAY IS DANGEROUS.

Industry usage Conditions 1 - 5 are generalized and evolving. 
Consult your Cannondale Dealer about how you intend to 
use your bike/fork. Please read your Cannondale Bicycle 
Owner’s Manual for more information about Intended Use and 
Conditions 1-5.

YOU CAN BE SEVERELY INJURED, PARALYZED 

OR KILLED IN AN ACCIDENT IF YOU IGNORE 

THIS WARNING. 

Damage / Inspection

WARNING

RIDING WITH DAMAGE IS DANGEROUS.
STOP RIDING IMMEDITE IF DAMAGE IS 

PRESENT.

The following conditions indicate that serious fork damage is 
present:

•  Any unusual “klunking” or knocking noises.
•  Change in travel.
•  Changes in normal functions.
•  Loss of adjustments features, oil leaks, or air leaks.
•  Crash or impact damage (deep scratches, gouges, dents, 

or bending)

•  Any small cracks under the bolt head of upper and lower 

clamp bolts. This inspection requires the removal of the 
bolts. 

•  Horizontal cracks above and below the intersection of the 

upper and lower clamps with the outer tube portion of the 
Lefty structure. 

•  Vertical cracks in the outer tube (where the races and 

needle bearings run). These may show as long, straight 
lines perhaps several lines parallel to each other.

Please read Inspect For Safety in PART II, Section D. of your 
Cannondale Bicycle Owner’s Manual. 

If your LEFTY is damaged, do not ride it. Contact your 
Cannondale Dealer to arrange service through an authorized 
service center. 

YOU CAN BE SEVERELY INJURED, PARALYZED 

OR KILLED IN AN ACCIDENT IF YOU IGNORE 

THIS WARNING. 

Making Adjustment 

WARNING

Make any external adjustments only when stopped. Attempting to 
adjust while riding can result in a loss of control.

YOU CAN BE SEVERELY INJURED, PARALYZED 

OR KILLED IN AN ACCIDENT IF YOU IGNORE 

THIS WARNING. 

Summary of Contents for LEFTY OLIVER














Reviews: