12
B
A
3.
2.
1.
Wheel removal
Once the rear axle (1) is removed, the hanger (2) and
attached rear derailluer will pivot down and back
slightly to enable easier removal of the rear wheel.
See inset A.
hanger replacement
hanger replacement kit is available as Cannondale
kit
KP432/
.
The kit includes the hanger (2) and a new pivot bolt
(3). Before installing a new hanger, be sure to clean
any dirt or debris on the dropout with a nylon brush
(old toothbrush). Inspect the area for any damage.
Lightly grease the dropout surface. Apply Loctite
242 (blue) to the pivot bolt (3). Align the hanger on
the opposite side of the dropout and tighten the bolt
to the specified torque.
ReAR DeRAILLeUR HAngeR - Kp432/
