11
Technical Information
Bottom Bracket (BB) Cable Guides / Routing
Bottom Bracket (BB) Cable Guides / Routing
Cables must not touch the spindle. Use a BB bearing assembly with a sleeve between the bearings
to protect the spindle from wear due to cables touching it. The interior of the BB Shell is to remain
free of any cable housings, hydraulic hoses or electrical wires These items must be captured by the
cable guides as they emerge from the downtube and exit to the chainstays and seat tube.
Identification
1. RD / Shimano Di2
2. FD/RB guide
3. Blanking plate, left
4. Blanking plate, right
5. Screws, M3 x 12
a. Slot for Di2 cable
b. RB hose trough
0.5 N·m
5
3
4
1
2
NGLI-2
a
b
b
M3 X 12mm
(2X)