18
SuperSix EVO CX/SE OMS
138671 Rev 1 (3/21)
Technical Information
Asymmetric Integration - Ai Offset
This frame requires a 6 mm offset.
To produce this offset, a 12mm gap should be present using the wheel alignment tool, shown above right.
Wheels for this frame will have nearly equal spoke angles and tension on both sides of the hub.
NOTICE
Use only 6 mm offset rear wheels. Incorrect wheel offset can damage your frame.
A standard-dish rear wheel assembled on this frame will result in insufficient tire clearance, leading to rubbing and
serious frame damage. This kind of damage is not covered by the Cannondale Limited Warranty.
Building/Trueing a Wheel:
If you choose to build or to true a rear wheel for use on this bike, make sure the 6 mm offset is present.
Consult with your Cannondale Dealer if you have any questions.
Asymmetric Integration - Ai Offset
12 mm
0 mm
Wheel rim
Aligment tool
Gap required
for 6mm offset
6 mm offset
Centerline of hub
Centerline of
frame and
wheel rim
Rear hub
