![background image](http://html.mh-extra.com/html/canon/0298b002/0298b002_instruction-manual_18485021.webp)
20
When the Speedlite is attached to an EOS-1D series camera, you can
also set the flash exposure level manually.
1
Set the camera and Speedlite.
Setting the camera’s shooting mode to <
W
> or <
q
> is
recommended.
Set the Speedlite’s flash mode to <
q
> (Manual flash).
2
Focus the subject.
Focus manually.
3
Set up an 18% gray card.
Place the gray card at the subject’s position.
In the viewfinder, the entire spot metering circle at the center
should cover the gray card.
4
Press the <
7
> button.
(
3
)
X
The Speedlite will fire a preflash and the required flash output for
the subject is retained in memory.
X
On the right side of the viewfinder, the exposure level indicator
will show the flash exposure level for the correct flash exposure.
5
Set the flash exposure level.
Adjust the Speedlite’s manual flash level and the
camera aperture so that the flash exposure level
aligns with the standard exposure index.
6
Take the picture.
Remove the gray card and take the picture.
Metered Manual Flash Exposures
A81_02.fm Page 20 Tuesday, February 5, 2008 2:33 PM
COP
Y
Summary of Contents for 0298B002
