Canon 0564B001 Basic Manual Download

Page: 146 / 214

11-19

Maintenance

●

Shipping

Apply the UPS authorized returning label provided in this guide.

Residents of Alaska and Hawaii:

Do not use the UPS authorized returning label. For

Alaska and Hawaii Canon set up alternative mail service with the U.S. Postal Service.
Please call

1-800-OK-Canon

to receive U.S. Postal Service merchandise returning

label.

■

Option A: UPS Pick-up

●

Give the shipment to your UPS driver when you receive your next regular delivery;
or

●

Take the shipment to your local UPS receiving point.

■

Option B: MBE Drop off

Take the shipment to a participating MBE (Mail Boxes, Etc.) Center.
For location, please call

1-800-949-6660

By using either of the above methods of shipment, your used cartridge(s) will
be forwarded to the Canon Cartridge Collection Center at no charge to you.

For further information about the Clean Earth Campaign in the United States, please
call:

1-800-OK-Canon

Summary of Contents for 0564B001























































































































































































































Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands

Canon 0564B001, Basic Manual

Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands