Canon 0564B001 Basic Manual Download

Page: 149 / 214

11-22

Maintenance

Transporting the Machine

Follow this procedure to avoid
vibration damage to the machine when
transporting it over a long distance.

CAUTION

Be sure at least two people carry the machine.

Disconnect the power cord and
all the cables from the back of
the machine.

Open the left cover.

Grasp the blue plastic pull tab
(A) on the toner cartridge.

Pull the blue plastic pull tab until
you can easily hold the handle of
the toner cartridge.

Remove the toner cartridge.

CAUTION

– Always hold the toner cartridge by its

handle.

– To avoid exposing the toner cartridge to

light, place it in its protective bag or
wrap it in a thick cloth.

– Do not open the drum protective shutter

on the toner cartridge. Print quality may
deteriorate if the drum surface is
exposed to light or is damaged.

Summary of Contents for 0564B001























































































































































































































Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands

Canon 0564B001, Basic Manual

Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands