Canon 0564B001 Basic Manual Download | Manualshive

Page: 15 / 214

background image

xiii

What C

an I Do w

ith T

h

is Machine?

Preface

Thank you for choosing a Canon product. Before using the machine, please read
the following instructions for your safety.

Important Safety Instructions

WARNING

Except as specifically described in this guide, do not attempt to service the machine yourself. Never
attempt to disassemble the machine: opening and removing its interior covers will expose you to
dangerous voltages and other risks. For all service, contact Canon Customer Care Center, or a Canon
Authorized Service Facility.

Handling and Maintenance

– Follow all warnings and instructions marked on the machine.
– Do not subject the machine to strong physical shocks or vibrations.
– Always unplug the machine before moving or cleaning it.
– To avoid paper jams, never unplug the power cord, open the left cover, or add or

remove paper in the machine while printing.

– When transporting the machine, be sure to remove the toner cartridge from the

machine.

– Place the toner cartridge in its original protective bag or wrap it in a thick cloth to

prevent exposure to light.

– Always grip the handle on the sides of the machine when you lift the machine. Never

lift the machine by any of its trays or attachments.

– Do not insert any objects into the slots or openings on the machine since they may

touch dangerous voltage points or short out parts. This could result in fire or electric
shock.

– Do not allow small objects (such as pins, paper clips, or staples) to fall into the

machine.

– To avoid spillage in or around the machine, do not eat or drink near it.
– Keep the machine clean. Dust accumulation can prevent the machine from operating

properly.

«
...
13
14
15
16
17
...
»

Summary of Contents for 0564B001























































































































































































































Reviews:

No comments

Related manuals for 0564B001

Brand: Xerox Pages: 16

Brand: Xerox Pages: 2

Brand: Xerox Pages: 2

MC560 MFP CX2032

Brand: Oki Pages: 247

Brand: Canon Pages: 36

Brand: Canon Pages: 62

WorkCentre 4260S

Brand: Xerox Pages: 8

Brand: Canon Pages: 738

Brand: Samsung Pages: 143

imageRUNNER 6570

Brand: Canon Pages: 274

Brand: Xerox Pages: 14

Brand: Xerox Pages: 2

Brand: Canon Pages: 684

Brand: Pantum Pages: 164

Brand: Konica Minolta Pages: 266

Brand: Hanin Pages: 27

Brand: Canon Pages: 65

Brand: idp Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands