12-10
T
roubleshooting
PLEASE WAIT
This message appears when
turning on the main power
switch, or when the machine
is not ready for printing.
Wait until the message
disappears.
RECEIVED IN MEMORY
The machine received the
fax in memory because
paper or toner ran out, paper
jams occurred, or incorrect-
size paper was loaded.
Load the correct-size paper
in the paper cassette,
replace the toner cartridge,
or clear the paper jams. For
more information, see the
following:
“Setting Paper Type and
Size,” on p. 3-8
“Replacing the Toner
Cartridge,” on p. 11-12
“Clearing Jams,” on p. 12-1
START AGAIN
– A transmission error
occurred because the line
condition was poor.
– The paper jammed or ran
out during printing a
report.
– Check the line condition,
then try again.
– Clear the paper jam, or
replenish the paper, then
try again.
STOP KEY PRESSED
PRESS OK KEY
[Stop] has been pressed
while scanning the
document using the ADF.
Press [OK], then set the
document again.
Message
Description
Action
Summary of Contents for 0564B001
