Canon 0564B001 Basic Manual Download

Page: 184 / 214

13-17

Machine Settin

5. PRINTER SETTINGS

Sets the to printer functions.

1. RECEIVE REDUCTION

Sets whether the received images print out at a reduced size.
(See Chapter 1, “Advanced Fax Features,” in the Advanced
Guide.)

Image reduction is turned on.

1. RECEIVE

REDUCTION

Selects the reducing type.
– AUTO
– FIXED REDUCTION (90%, 95%, 97%, 75%)

2. REDUCE

DIRECTION

Selects the reducing direction.
– VERTICAL ONLY
– HORIZ & VERTICAL

OFF

Image reduction is turned off.

2. TWO-SIDED PRINT

Sets the type of two-sided printing for faxing. (See
Chapter 1, “Advanced Fax Features,” in the Advanced
Guide.)
– OFF
– ON

3. CONT. PRINTING

Selects how the machine responds when the
<TONER LOW/PREPARE NEW TONER> message
appears.

RX TO MEMORY

The machine stores all documents in memory.

KEEP PRINTING

The machine does not store documents in memory if the
toner runs out. Reset to <RX TO MEMORY> after replacing
the toner cartridge.

FAX SETTINGS (MF6550/MF6560/MF6580 Only)

Summary of Contents for 0564B001























































































































































































































Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands

Canon 0564B001, Basic Manual

Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands