Canon 0564B001 Basic Manual Download

Page: 188 / 214

13-21

Machine Settin

5. PRINT QUALITY

Sets the image quality, density or toner saving mode for
printing.

1. IMAGE REFINEMENT

Sets whether to print smoothly the jagged outlines of
characters and graphics.
– ON
– OFF

2. DENSITY

Adjusts the print density. (1-9)

3. TONER SAVER

Sets whether toner saving mode is enabled.
– OFF
– ON

6. PAGE LAYOUT

Sets the printing layout.

1. BINDING

Sets the binding position for two-sided printing.
– LONG EDGE
– SHORT EDGE

2. MARGIN

Sets the page margin in inches or millimeters.
– INCHES (-01.90INCHES-01.90INCHES)
– MM (-50.0MM-50.0MM)

7. COLLATE

Sets whether to collate the printouts automatically.
– OFF
– COLLATE

8. ERROR TIME OUT

Sets the length of time before the machine returns an error
when no data is received from the computer.

Sets the error time out period. (5SEC-300SEC)

OFF

The error time out is off.

9. INIT. PRINTER SET

Restores all <PRINTER SETTINGS> to the default.
– OFF
– ON

PRINTER SETTINGS

Summary of Contents for 0564B001























































































































































































































Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands

Canon 0564B001, Basic Manual

Search results

Summary of Contents for 0564B001

Reviews:

Related manuals for 0564B001

Brands by name

Popular brands