5
Connecting the Camera and Computer
To download to your computer images shot with your camera, you will
need to connect your camera and computer using the interface cable
provided with your camera.
1
Connect the large plug of the cable into the USB port
of your computer.
O
For the location and direction of the USB port, refer to the
computer User’s Manual.
2
Connect the small plug of the cable into the <
>
terminal on your camera.
O
Connect the plug with the <
> mark facing the front of the
camera.
O
Image downloading preparation is now complete. Continue with
“Starting up EU”.
O
With
, you can fix the plug to the camera with
the cable protector to prevent the plug from disconnecting. For
details on using, refer to
1Ds Mk III
1D Mk III
Starting up EU
When the camera’s power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
1
Set the camera’s power switch to < ON >.
¿
Communication between the camera and the computer begins
and the dialog box in step 2
is displayed.
O
If the window in step 2 is not displayed even when you set the
camera’s power switch to < ON >, double-click the [EOS Utility]
icon on your desktop to start up EU.
O
cannot communicate with EU if the camera’s
mode dial is set to <
>. Set the mode dial to a mode other
than <
>.
REBELT1i
500D
COP
Y
