background image

172

Menu options under the [

Z

1

], [

Z

2

], and [

Z

3

] tabs are explained 

below.

[

Z

1]

 

Movie exposure

Normally, set this to [

Auto

].

Setting it to [

Manual

] will enable you to manually set the ISO speed, 

shutter speed, and aperture for movie shooting (p.156).

 

AF method

The AF methods are the same as described on pages 142-149. You 
can select [

FlexiZone - Single

], [

u

Live mode

], or [

Quick mode

]. 

Note that continuous focusing of a moving subject is not possible.

 

AF with shutter button during movie recording

When [

Enable

] is set, AF is possible during movie shooting. 

However, continuous autofocusing is not possible. If you autofocus 
during movie shooting, the focus may be momentarily thrown off or 
the exposure may be changed. The movie will also record the lens 
operation noise.
During movie shooting, if the AF method is set to [

Quick mode

], AF 

will be executed in [

FlexiZone - Single

].

3

 Menu Function Settings

 

The settings under the [

Z

1], [

Z

2], and [

Z

3] menu tabs will 

take effect only in the <

k

> mode. They will not be applied in 

shooting modes other than the <

k

> mode.

 

The [

AF method

] setting will also be applied to Live View shooting.

Summary of Contents for 1200D























































































































































































































































































































































Reviews: