Canon 1200D Instruction Manual Download

Page: 67 / 342

When you want to shoot flowers or small things up close, use the <

(Close-up) mode. To make small things appear much larger, use a
macro lens (sold separately).

Use a simple background.

A simple background makes small objects such as flowers stand out
better.

Move as close as possible to the subject.

Check the lens for its minimum focusing distance. Some lenses
have indications such as <

0.25m/0.8ft

> on them. The lens

minimum focusing distance is measured from the <

> (focal

plane) mark on the top of the camera to the subject. If you are too
close to the subject, the focus confirmation light <

> will blink.

If you use flash and the bottom of the picture looks unusually dark,
move away from the subject.

With a zoom lens, use the telephoto end.

If you have a zoom lens, using the telephoto end will make the
subject look larger.

Shooting Close-ups

Shooting Tips

Summary of Contents for 1200D























































































































































































































































































































































Search results

Summary of Contents for 1200D

Reviews:

Related manuals for 1200D

Brands by name

Popular brands

Canon 1200D, Instruction Manual

Search results

Summary of Contents for 1200D

Reviews:

Related manuals for 1200D

Brands by name

Popular brands