Canon 1200D Instruction Manual Download

Page: 123 / 342

123

Customizing Image Characteristics

Sharpness

Adjusts the sharpness of the image.

To make it less sharp, set it toward the

end. The closer it is to

the softer the image will look.
To make it sharper, set it toward the

end. The closer it is to

, the

sharper the image will look.

Contrast

Adjusts the image contrast and the vividness of colors.

To decrease the contrast, set it toward the minus end. The closer it is
to

, the more muted the image will look.

To increase the contrast, set it toward the plus end. The closer it is to

, the crisper the image will look.

Saturation

Adjusts the color saturation in the image.

To decrease the color saturation, set it toward the minus end. The
closer it is to

, the more diluted the colors will look.

To increase the color saturation, set it toward the plus end. The
closer it is to

, the bolder the colors will look.

Color tone

Adjusts the color tone of skin.

To make the skin color redder, set it toward the minus end. The
closer it is to

, the redder the skin tone will look.

To reduce skin redness, set it toward the plus end. The closer it is to

, the more yellow the skin tone will look.

Parameter Settings and Effects

Summary of Contents for 1200D























































































































































































































































































































































Search results

Summary of Contents for 1200D

Reviews:

Related manuals for 1200D

Brands by name

Popular brands

Canon 1200D, Instruction Manual

Search results

Summary of Contents for 1200D

Reviews:

Related manuals for 1200D

Brands by name

Popular brands