69
Troubleshooting
Paper source selection is
inappropriate.
z
You cannot load paper other than A4, Letter, or B5-sized plain paper in the
Front Feeder. When using any other type of paper, load it in the Auto Sheet
Feeder.
z
Make sure that the proper paper source is selected. If not, change the paper
source using the
Paper Feed Switch
or the printer driver. For details, see
“Changing the Paper Source” on page 11.
Note
When printing from your computer, if a setting other than
Paper Feed Switch
is
selected for
Paper Source
in the printer driver, the printer driver settings takes
precedence when printing. For details on paper source selection using the
printer driver, refer to the
Printer Driver Guide
on-screen manual.
Too much plain paper loaded.
You can load approximately up to 150 sheets of 17 lb / 64 gsm plain paper in the
Auto Sheet Feeder (0.52 inches / 13 mm in stack height) and up to 110 sheets
of 17 lb / 64 gsm plain paper in the Front Feeder (0.39 inches / 10 mm in stack
height). However, proper feeding of paper may not be possible at this maximum
capacity depending on the type of paper or environmental conditions (either
very high or low temperature and humidity).
In such cases, reduce the sheets of paper you load at a time to around half
(around 0.2 inches / 5 mm in paper stack height).
For details on loading paper, see “Loading Paper” on page 12.
Foreign object in the Auto Sheet
Feeder or Front Feeder.
Make sure that there are no foreign objects in the Auto Sheet Feeder or Front
Feeder.
Envelopes not prepared or loaded
properly.
z
Refer to “Envelopes” in the
User’s Guide
on-screen manual, and prepare the
envelopes before printing.
Once you have prepared the envelopes, load them in the Auto Sheet Feeder
in portrait orientation. If the envelopes are placed in landscape orientation,
they will not feed properly.
z
If the Paper Support is extended, retract it.
z
Set the Paper Thickness Lever to the right.
Rear Cover is not attached properly.
If the Rear Cover is not reattached properly after it has been removed, it can
cause paper jams. Press firmly on the Rear Cover until it is fit squarely in the
rear of the machine.
Cause
Action
