background image

26

Before Printing

(4)

Activate/deactivate Red eye correction.

*1

Corrects red eyes in portraits caused by flash photography.
Red eye correc. OFF, Red eye correc. ON

(5)

Activate/deactivate Vivid photo function.

*1

Makes green and blue more lively.
Vivid photo OFF, Vivid photo ON

(6)

Activate/deactivate the Photo Optimizer pro function.

*1

Automatically optimizes brightness and tone of a photo.
Photo opt. pro OFF, Photo opt. pro ON

(7)

Activate/deactivate the Noise reduction function.

*1

Reduces the noise on blue areas like the sky as well as on black areas.
Noise reduction OFF, Noise reduction ON

(8)

Activate/deactivate Face brightener function.
Brightens a darkened face on the photo taken against the light.
Face brightener OFF, Face brightener ON

(9)

Activate/deactivate Image optimizer function.

*1

Corrects and smooths the jagged contours for printing.
Image optimizer OFF, Image optimizer ON

(10)

Adjust brightness.
Brightness -2, Brightness -1, Brightness standard, Brig1, Brig2

(11)

Adjust contrast.
Contrast -2, Contrast -1, Contrast standard, Co1, Co2

(12)

Adjust color hue.
Color hue red +2, Color hue red +1, Color hue original, Color hue 1, Color hue 
2

(13)

Activate/deactivate Effects

*1

Applies special effects to the photo, such as printing in sepia tones or with a sketch 
illustration like effect.
No effects, Effect: Sepia, Simulate illustration

(14)

Activate/deactivate Fade restoration

*2

Corrects the color when printing photos that have faded or color cast over time.
Fade restoration OFF, Fade restoration ON

*1 Can be selected only in Memory card mode.
*2 Can be selected only in Easy photo reprint or Film print mode.

Summary of Contents for 1454B002





















































































































Reviews: