65
Routine Maintenance
Manual Print Head Alignment
If the results of Automatic Print Head Alignment are not satisfactory, follow the procedure below
to perform Manual Print Head Alignment.
For details on performing Automatic Print Head Alignment, see “Automatic Print Head
Alignment” on page 64.
1
Make sure that the machine is turned on, and then load three sheets of A4 or
Letter-sized plain paper in the Auto Sheet Feeder or the Cassette.
2
Open the Paper Output Tray, and then open the Output Tray Extension.
(1)
Put your finger on the top of the Paper Output Tray and open it gently.
(2)
Open the Output Tray Extension.
3
Press the
Paper Feed Switch
to select the paper source where you have loaded
paper.
4
Select
Settings
on the
HOME
screen.
See “Basic Operation for the Operation Panel” on page 2.
5
Select
Maintenance
, then press the
OK
button.
The Maintenance screen is displayed.
6
Select
Manual head align
, then press the
OK
button.
Confirmation screen is displayed.
7
Select
Yes
, then press the
OK
button.
8
When the Print Head alignment pattern is printed, select
Yes
, then press the
OK
button.
Important
You cannot print the print head alignment pattern if paper of size other than A4 or Letter is loaded.
Be sure to use A4 or Letter-sized plain paper.
Note
If you select
Head alignment print
, the machine exits the process after printing the current head
position adjustment values.
Summary of Contents for 1454B002
Page 3: ...Photo All in One Quick Start Guide ...
Page 111: ...107 Index ...
Page 112: ...108 Index ...
Page 113: ...109 Index ...
