1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-28
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
5.
Press
[Start].
When you set the documents on the platen glass, press [
] or [
]
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX
SETTINGS> in <TX/RX SETTINGS>, and if you have specified the
destination by any other method than using numeric keys, the
machine starts scanning automatically without pressing [Start], after
the preset time for this setting is elapsed.
Job Recall
You can recall the last three destinations, scan settings, and send
settings which have been set, and then send your documents.
When <REST. REDIAL/CALL> is set to <ON>, [Recall/Pause] is not available.
(See “Restricting Job Recall,” on p. 8-19.)
1.
Set
documents.
Place the first page on the platen glass if you are not using the ADF.
■
2.
Press
[SEND/FAX].
3.
Press
[
Recall/Pause].
4.
Press
[
] or [
] to select <1 BEFORE>, <2
BEFORE>, or <3 BEFORE>, then press [OK].
5.
Confirm that the desired recipient is displayed.
You can change the recalled scan and send settings if necessary.
6.
Press
[Start].
When you set the documents on the platen glass, press [
] or [
]
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX
SETTINGS> in <TX/RX SETTINGS>, and if you have specified the
destination by any other method than using numeric keys, the
machine starts scanning automatically without pressing [Start], after
the preset time for this setting is elapsed.
